Opinion map Panda 70cv mj8df2b232hw00a 9754b287

[simonemora]

The Map Step3
Oh yes, I have to search for other software and deepen, great, because with this map I'm tribulando to understand how and how much to increase (the ecm does not appoint different curves).

[simonemora]

Anyone that can help me? Thanks

[simonemora]

I have reviewed all based on your directions, but unfortunately some of the maps in the ecm are not me the highlights, and then I have not been able to put the hands (of the fumes).
Let's see I have converted well or if everything must be redone....
I await the insults ah ah Thank you

[cinqueturbo]

Nada...

I'll give you another board found a file 90-105hp and study it by comparing the maps and conversion factors that you have indicated..
maybe the loads that we see both..

[simonemora]

I imagined he had done wrong.
I delete everything and I start again from scratch, following all your advice....

[simonemora]

To administrators: sorry I was called evil, is 75hp and is NOT 70cv but I don't know how to fix. Thanks

[salvatoreragonese]

Simone in the discussions we also mention the Software in the network easily, knowing to try and follow the discussion..

in this, we speak of a MJD6F3HW03P Num SW: 3443P570
http://www.professionalchiptuning.ne...ht=impariamola

in the quest the other MJD6JFHW01C Num SW: 1065Y154
http://www.professionalchiptuning.ne...ht=impariamola

look for them on the web or P2P..

if you trust keeps you stunned only that I advise you to delete the DPF on these does serious damage..

in every way I'll give you two addresses the fundamental to start to push the car of your file so you start to slam into the head

EGR
1EEC12 Port 0
1EEC5E Port To 5000

Pedal position/RPM/NM
1E2D38
1E2F78
1E473C
1E49F2
1E4C32
1E47B2
Factor Offset 0,023438

Torque limiter RPM/Origin Water/NM
1E31AC
Factor Offset 0,023438

Torque limiter RPM/Origin Water/NM
1E33B8
Factor Offset 0,023438

Limiter torque x Gear
1E3BD4
Factor Offset 0,023438

Limiter torque x RPM/NM
1E3C18
1E3DF0
1E3C30
1E3E20 Limits the torque with Engine failure
Factor Offset 0,023438

Limiter torque x RPM/Origin Diesel/NM
1E3C68
Factor Offset 0,023438

Limiter Diesel mm3/str
1D56C2
Factor Offset 0,003000

Limiter Diesel mm3/str
1D5720
Factor Offset 0,003000

Injection Phase
1DCE28
Factor Offset 0,300000

Limiter Diesel mm3/str
1D0CD0
Factor Offset 0,002930

Limiter Diesel mm3/str
1E3D08
Factor Offset 0,002930

The injection times us/press.Rail/mm3/str
1DE668
Factor Offset 1,000000

Five I just wanted to thank me for sharing some of the limiters that I went to check on my 95 hp and are generally set much higher (normal) there would be other limiters to make nice to these engines?

[simonemora]

Five I just wanted to thank me for sharing some of the limiters that I went to check on my 95 hp and are generally set much higher (normal) there would be other limiters to make nice to these engines?

I some maps I don't recognize them because ecm appoint a few, and evil. Thank you I also because it has enlightened me!
Someone has the file in winols so step by ecm-winols? Thanks

[salvatoreragonese]

[QUOTE=simonemora;130103]I some maps I don't recognize them because ecm appoint a few, and evil. Thank you I also because it has enlightened me!
Someone has the file in winols so step by ecm-winols? Thanks[/QUOT
It is not as easy as it seems winols ! Anyway, I'll let you know later this evening if I and with the authorization of the directors will step all

[simonemora]

Thanks! Yes, of course, only if possible