-
disconnect battery smart four four for repair central
Hello to all.
I have a perplexity with a smart four four diesel 2006 manual transmission, that I have to go to pick up to make a repair on the central locking.
the problem in question, and that the diagnosis does not have errors but if you press the key button to open or close the central locking feel take 2 relays which one I assume is the doorman and the other hood.
I have already identified the problem but, of course, to take it apart and verify the fault and to repair it I have to disconnect the battery.
I was wondering if, by disconnecting the battery and riattaccandola I can find with the same problem as the one with the automatic transmission, which often and need to redo the alignment.
Since this is a manual gearbox, I was wondering, if I am not with any similar problem.
I put it to those who have the most experience, as this is not the ever made, having little experience, I have dealt with some mercedes which I was expecting similar problems, but thankfully it's always gone well.
I thank anyone who can give me a response because if they are not equipped not the touch.
-
THE AVERAGE USER
Hello, the problem of the alignment of the transmission occurs of course only on the automatic transmissions and not always...as far as I know you should not have problems,I worked with the Smart forfour I have disconnected the battery and I don't recall ever having had trouble...yet wait for some other answer, but I would tell you to go quiet
-
Hello joseph, thank you for your reply.
I did some research and it seems that some of the time understood it to lose the alignment framework.
In fact, before proceeding, I would like to study the thing.
If you are having this bad luck I have to know how to move.
I have never returned an electronic device repaired or nelke the same conditions as
I and arrived.
For the versions with the automatic gearbox, I knew that sometimes this happens and this is the reason I was wondering
If it was also with these.
And my golden opportunity....if you can fix this problem I get the job at the river and at this point you
is a serious step to a higher investment.
-
If you can be of help I have made a couple and I have not had any of these problems.. Maybe **** nothing but trouble
-
ok thanks for the help anyway this morning I went to withdraw it and not the outlet because it does not enter into the diagnosis, the current does not reach the outlet, and a while it's to be expected.
then the retreat next week because I need time to disassemble everything.
I will keep you updated as soon as I find the fault or if you are having problems.
Tags for This Discussion
Write permission
- You you can not post new threads
- You you can not send answers
- You you can not send attachments
- You you can not edit your posts
-
The rules of the Forum