Vergin ecu IAW5AMHW610 ....,,problem.

[maurof650]

Are struggling with a IAW5AMHW610 micro st269, who does not want to hear to get riverginare (scodifica partial).
I have tried and re-tried in boot mode with rooster V2 v. 48, even after a change of the map, but if I try the ecu on the bike the light immo is still on, after opening the picture, at the end of the canons flashes.
The interface works perfectly, as I have already verginizzato, with scodifica partial, other ecu of the same type.
Thinking that the ecu was faulty (it isn't) I have disabled the immobilizer and the engine starts.
We accept tips.

[maurof650]

After various tests, I checked that the eeprom is not changed in any way, a sign that it is a problem of the microprocessor.
In fact, I tried to rewrite only to the eeprom but after the reading is always that of the source.
I doubt that this ecu has been already processed with some tool for auto not to rewrite the micro.

[duca]

the bike is not the you can process as the car with the cock you have to put in the boot and use the clone and decode but the one makes the 168 micro not the 269

[maurof650]

I make since some years without problems in boot mode, always with the galletto V2 ver. 48. This certainly had problems, probably before you get to me, it was carved with some tools for the car and it is already so that you are not locked altogether.
That in the end she had problems, I had the certainty that after the other tests, in fact in scripture it would also double the time and I have also tried and retried to write only the ee2prom, but nothing to do.