Hi,
Are, as always, to beat the nose, after you have tried to write on a bosch EDC16c34-2.30 focus 2009 with elmconfig(8m5112a650lg), I had one error, not having done the dump before, with the control unit out of use.
I wonder if you should recover a file ori equal, and by some miracle I can write it above.
with ids FORD I reset the unit to the original, I have the situation, and without hope????
Maybe some of the ideas of genius???
Thanks
what type of error has given you the program?
theoretically, with the ori, if you can to again write the eeprom, it should return to play (immo permitting, I don't remember if this ecu code is stored on eeprom or on something else). Same thing with ids ford.
In the case I failed to write the eeprom then you need to proceed to the reprogramming tour
Hello, the only solution, and to find an original file read in bdm, and then write it in the bdm...
go to bdm and solve!!!
What is a hare? A rabbit Abarth
if you sputtanata only the flash, with an equal, you can solve , but if he is sputtanata for the case of the e2prom then are a pain because this has scodificarle is a mess.
ugo ---- president A.E.P.
Thank you for the answers, the way forward, and that hce I thought, I retrieved a bdm100 , I have tried in every corner of the web, no flash equal , there is a database or a way to recover the flash the same???
Can you post the number of both the software and the Hw...Originally Written by taliane
I'm on a lot of these on peugeot and citroen I've done scodifica total, they work well and do not leave even when the light is on
on the ford does not work that mod...
according to me, you first recover a ecu used but you have to bring in the ford and put the file ori
If you are never wrong means you're not solving a really difficult problem. This is a serious mistake
Write permission
Quote
