Read real nevertheless+ 6f3

[pippo65]

Hello all,I wanted to know if there is a tool, that does not cost a madness, able to make a real reading from the obd to a Marelli 6f3.
Thank you all for the answers.

[mafani]

of course only I terminal

[pippo65]

of course only I terminal

Type kess v2 will not do it?

[mafani]

no, I think to make virtual read

[pippo65]

no, I think to make virtual read

Then I'll have to go to bdm

[mafani]

unfortunately it is the only less expensive,but you have to open the ecu

[passione motori]

Hello, the 6f3 is the can that kline is read quietly and there are many of them to know, instead, ioter.....make up by obd the problem and if you work the file to him with calculate cks

[pippo65]

I/o terminal from the obd reads it all, micro, flash and eeprom, and is not too expensive for one that works (has a few small bugs, but all in all it works very well), alternatively, there is commercially the version clone of MPPS V18, that in addition to reading the marelli obd, is also tricore, and much more.

Thanks for the info!!!

[pippo65]

Hello, the 6f3 is the can that kline is read quietly and there are many of them to know, instead, ioter.....make up by obd the problem and if you work the file to him with calculate cks

Hello Passion for Engines, with a galletto v54 to the counter, the line can or kline can't get a real reading?