problem diagnosis fiat punto

[Alessio93]

hi to all they !!! I am in the workshop I have a 1.2 8v with indicator light air bag turned on .. I'm going to find the diagnosis with multiecuscan with the cable kkl and the red connector and not let me go .. you can you please tell me if there is some other way to make the diagnosis air bag? or if you have to do some modifications on the cable kkl ? thanks to all !!!

[dariuccio]

do you have the contact spiral interrupted?

[Alessio93]

I don't think the kit, and new

[dariuccio]

fuses? ? strange that it does not enter the diagnosis unless there is some interruption

[Alessio93]

then I will explain to you how things went !! time ago this car had suffered a collision and the air bags were erupted all and 2. I have repaired the unit with the airbags in question, and the machine walked up at it . it can be because of the centralia airbag that does not make me enter ? anyway. let? attempts with another diagnosis, and you do? know .. thank you all guys

[dariuccio]

sure that may have been caused by the airbag ecu, but if it was working and the car has not undergone any of the other shock ? strange that it is broken

[Alessio93]

no the car has not suffered any shock !! but ? indented with the failure of the air bag and the yellow of the passegiero on, checked fuses and all are ok ! it may be that we need to do a proxi alignment ? thanks dariuccio

[dariuccio]

you can try, but the defect is a classic point ? the body computer and if ricrdo well the airbag control unit communicates through the body.
check if there are outlets under the seats and make sure they make good contact

[Alessio93]

all sorted it was a mass that I was to communicate with drivers through dariuccio

[giuseppe89]

guys I appended to this post to not create a new one,I have a similar problem on a punto evo to my aunt which without having received the shock, he turned on the lamp drivers and gives an error of lock of fuel in the display of the dashboard...in the diagnosis does not communicate and since it has only 23,000 miles I don't think you have burned the ecu...I don't have the wiring diagram to check the power supply,I checked all the fuses and they are ok,someone has a wiring diagram or has happened with a similar problem?the ecu is a continental