update kess - k-tag

[michele30]

I've seen around that you can update the kess to version 2.06 but saw that both kess that ktag work with the same software, updating the one is up to date, even the other or not?
There are cortezze to follow or not?

[159sportwagon]

It is, in fact, if you update , are updated every two

[frantik3]

update only the sw but not fw so what do you do with the 1.89 do with the 2.06, however, the only thing that you can? update and put the files of the virtual reading

[michele30]

ok so if I update to version 2.06 is not of the problems with the k-tag works similarly, but I don't understand what you need to do to update?
you should not update the firmware?

[robo]

If you update no problem, it is recommended that bsemore not connect to the online tool. In any case, if you have the 1.89 nothing changes. Active protocols are in the firmware thing well known, you can put software 2.08 that you will always see the most? protocols to be blurred..

[rodcraft86]

the ktag 2.06 has many disabled protocols, such as the edc16c39 bdm while on 1.89 are active, for the kess instead of c'? something more? as the mini r60 present in the 2.06 is absent in the 1.89

[michele30]

This firmware is not to be found somewhere?
you need to update is that of kess than that of the k-tag, right ? the same?

[159sportwagon]

Or a link to download the v1.89. Now the drain.these days I try again to connect with the k-tag . Then I'll know

[159sportwagon]

I installed the 1.89
But do not connect . I don't know what am I doing wrong. I enclose a
The
Photo . [ATTACH=CONFIG]8820[/image.jpgimage.jpgTTACH]image.jpg

[rodcraft86]

that ecu ?? the led is blue that you see behind what