I made a map for the golf tdi 130hp...I wanted to know if it can? be good and if there are other maps out of the driver to change to make it travel even more?...I want to know if they are correct the changes to the axes x of the various map 1 2 and the boost rpm...thanks in advance
the map ? changed bad very bad changes that are wrong and without sense...the maps in the ecm called injection parzializzate have maps of lambda and does not always need to be modified and then too much percentage on the fuel and too much in the couple what makes games the flywheel and clutch...then you forgot similar maps...no offense, you should investigate trusted!
Then...the similar maps are you referring to the last...that ? a map that should be of concern to the setting to the automatic transmission from what I understand then I have not touched anything for that...then torque limiter I put increments that are very high only after 2000 2500 where ? the maximum torque, and then ? them that is at risk of slipping the clutch...injection zoned I calculated an afr of 14 to 16 depending on the curve...where did I go wrong?...and for the map I gave 90punti why? from what I ppotuto study I realized that 30 points is equal to 1 degree in the tdi...correct me if I'm wrong
too much fuel and too much in the couple then should I study the file to tell you what's missing but I'm sure there are other limiter and safe, and you've raised the SVBL
SVBL single value boost limit this? single value turbo limited...therefore the value of emergency that goes off if the turbo pressure exceeds that which is written in the map, or when the turbo goes bust the values, or when the turbo is not working well...if you increase the boost is increased by the SVBL...after I look at the file and tell you where it is located
winols can't find it...I had a version but it was the demo
Quote
