Ecu replacement edc16c34 peugeot

[blackwolf76]

I have to replace the ecu on a 207 1.4hdi edc16c34.

In practice, I ? went short when I was going to read it in the bdm, and you ? burned out, now I'm freaking out to replace with another. Since I have not found the same identical in demolition, comparing with esitronic I found a compatible.

In practice, this is a 0281013868 the one mounted on the car and I have to replace with a 0281011560, only that I cannot get it to start in any way. I tried to scodificare with both immodec that with the software application, scodifca that there is around this type of ecu.

I enclose a file ori bed in the bdm of the unit is to be demolished, and eeprom read tour from the ecu to the original.

Thanks.

[legendaryslave]

is this reading bdm 1037380749

[legendaryslave]

http://www.professionalchiptuning.ne...5726#post95726 post 15
load this and 2p of the car ori if it does not change hw

[klajdin]

if that doesn't work I want to do a test only on the E2p, let us know...

[legendaryslave]

if that doesn't work I want to do a test only on the E2p, let us know...

there would also be immo off from e2p but from test

[blackwolf76]

Nothing to do...
Now, at least, to consent to the starter, turns over but will not put it into motion. Diagnosis gives me some error related to some electro valves, though ? everything is ok to ****llo encoding and enabling the control unit.

[klajdin]

there would also be immo off from e2p but from test

in fact, legend I have not tested it and I can't see your file, and I do not know if ? the same so I put what I found, test the file immo and if it is not to copy the same differences on your file

Immo_off.rar

[legendaryslave]

Nothing to do...
Now, at least, to consent to the starter, turns over but will not put it into motion. Diagnosis gives me some error related to some electro valves, though ? everything is ok to ****llo encoding and enabling the control unit.

let it be then put the same code bosch ? matter of encodings and various decks and just a difference of electrical system

[blackwolf76]

Nothing to do. I mounted the unit with the same hardware , backup here on the forum from the legendary and original eeprom, but the car still does not want to know to start.

As it seems to me the backup not ? compatible because it takes me to the diganosi errors related to the functions that the car did not...

[blackwolf76]

Is driving me fool is in the car.

In practice, the backup that has brought legendary is the same as the soft and hardware of what should be on the machine. Load them on the centraliona demolition that I have taken with the same hardware, along with the original eeprom and the car takes its consent to start, turn the starter motor but not part of it. He gives a series of errors related to the fap:

P2127/2124 solenoid valve bypass cooler intake air
P0473 sensor differential pressure
P0532 pressure sensor chiller

But if it has the same number of soft and hardware backup as caxo ago at the behest of the fap in the fitting when the car isn't it ? with?? This could be the reason for which will not start... you might Like to fix??