Page 1 of 7 123 ... LastUltima
Results 1 to 10 of 64
  1. #1
    BEGINNER
    Date Of Registration
    Mar 2014
    Messages
    34

    problem bootmode edc 17 bmw

    Hello all, I own a bmw 177 hp with edc 17, 2009, with the galletto clone v.53 I try to do a full backup in the boot but nothing, I from the data of the controller, and when I say read all does not go ahead gives me error, and a controller identical same identification codes purchased in the bay, I do the same procedure and everything is ok reads and writes perfectly, I can not understand why it happens to me this. Greetings

  2. #2
    THE AVERAGE USER (OF) L'avatar di explode82
    Date Of Registration
    Nov 2012
    The resort
    NAPLES(CRISPANO)
    Messages
    395
    try to bring the voltage of the power supply of the ecu 13v, or use a good battery charge and see that it should go
    GALLO ORI + KESS V2 ORI

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Udine
    Messages
    103
    I agree with explode82 make sure to check the current supply if a no go, but on the ecu identical works, throw away that which is not law

  4. #4
    THE AVERAGE USER L'avatar di scinti
    Date Of Registration
    Mar 2013
    The resort
    (LT)
    Messages
    276
    Considering that the supply voltage of these power units are very demanding as voltage hi and good job

  5. #5
    BEGINNER
    Date Of Registration
    Mar 2014
    Messages
    34
    Prover? and you do? know

  6. #6
    BEGINNER
    Date Of Registration
    Mar 2014
    Messages
    34
    for hftdelta, the control unit that is not law ? the one that is currently running on the machine, pi? you keep it ori not I can do, but the fact that already? had it remapped and it went back to ori why? I did not like how he was, no one could make up the remapping as they all asked me for the file ori, and the genius that I had remapped it back to me has ever given, and I decided to bring it back to the ori bmw, in such a way to make the backup of the entire map and be able to do the remap again, and here is what I discovered

  7. #7
    BEGINNER
    Date Of Registration
    Mar 2014
    Messages
    34
    Citazione Originally Written by Santopalermo Visualizza Messaggio
    Prover? and you do? know
    I was wrong prover? and you do? how ? gone, but not ? some of you, and of palermo or surroundings

  8. #8
    ACTIVE USER (OF) L'avatar di sportknight
    Date Of Registration
    Dec 2012
    The resort
    Matera
    Messages
    1,423
    have added the protocol tprot up to date?

  9. #9
    THE AVERAGE USER (FO)
    Date Of Registration
    Mar 2013
    Messages
    282
    Hello
    Sure, tprot up-to-date.

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Udine
    Messages
    103
    Hello santopalermo my question, and as you said you have a unit that is equal and that you can read the map, the one that you have on instead no, it is not he said that if the ecu has any problem the car does not go, it may be that making it to remap ori in the bmw you habbiano put some lock update; my "he via" it was in the sense ironico. I would try to scodificarla and to read and make a comparison with the one that you can map to see that no, there is something that blocks writing, or I would opt to find one in a demoman, and so I take off the thought.

Page 1 of 7 123 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •