put the miles on the original opel astra H 1.7

[speedo]

hi, as in my presentation, but to present here my question regarding the difference between miles original, true self, and kilometers marked by the speedometer

time is the one apart carriages I've taken over the speedometer from an astra replacing my that was not working in the central display

everything is ok, now? I find the miles on the speedometer of about 40 thousand kilometers in less (by checking with opcom clone I read on obd miles true in the ecu..what program software can I use to update the speedometer(and not the miles on the engine control unit)

you experienced the word..thanks

[legendaryslave]

If you have opcom you can write new km, but you need the pincode but since you replaced the framework you need to have

[speedo]

With opcom arrival at the entry odometer makes me write the km, but when I press enter nothing happens and nor asks me for the pin..any alternatives?

[legendaryslave]

With opcom arrival at the entry odometer makes me write the km, but when I press enter nothing happens and nor asks me for the pin..any alternatives?

you have to be incremented or decremented, otherwise you have to do is buy a new 2p and change the file starting from your reading,the eye and delicate In the opening

[speedo]

you have to be incremented or decremented, otherwise you have to do is buy a new 2p and change the file starting from your reading,the eye and delicate In the opening

if you increase you mean that I have to put the miles accurate (then in pi? compared to what it says on the speedometer) I have already? done and when I press enter nothing happens much? the speedometer shows kilometers (wrong) and I have tried several times

cos'? this 2p..you could be a pi? clear? thanks

[biondo83]

if you increase you mean that I have to put the miles accurate (then in pi? compared to what it says on the speedometer) I have already? done and when I press enter nothing happens much? the speedometer shows kilometers (wrong) and I have tried several times

cos'? this 2p..you could be a pi? clear? thanks

2p would be the EEprom that contains the "sensitive" referring to the mileage.
Make a backup of your EEprom (obviously dissaldandola) using a card reader from the counter and then change the KM directly from the address of the EEprom.

[legendaryslave]

Wow..sorry, but programs that allow you to give us? without desolder non ce n? are?
If not, and not being the expert in the reading eeprom c'? or do you have a step by step guide?

no step by step guide no, but that I know of that memory ?even programmable and must be replaced with a new one, the only solution that I know of ? open the panel and unsolder the memory, if some other user knows an alra I don't know, that's why you must speak to a profssionista that will give you the assurance of a job done as it should be, if you have little experience I don't recommend you venture out into this cooperation, among other things, I want to reiterate that the framework ? difficult to open and riski to break the flat.