Immo Off Renault Bosch ECU / ECM 0281010077 / EDC MSA 15.5

[cinqueturbo]

Hello Guys, or a Scenic 1,9 with this ECU Renault Bosch ECU / ECM 0281010077 / EDC MSA 15.5
would it be possible to make a scode total?
or the car with a flashing red led and not a part of ... with two keys...

[gezame]

Hello
yes, you can do it without problem and without light, without emulattore.

Hello
To start y see you problem are de scodifica, disolda the eeprom 24c02 (b58xxx) here they are on the bottom of the ecu.
The car part in the recovery, but part of it.

[legendaryslave]

Made pi? sometimes you have to replace the 24c02 with a 24c04 raise the pin 7 and circuitarlo on 8 and cut the line immo now I can't remember what tomorrow will place all included files tested

[gezame]

Hello
You have to cut the pin 59 to line immo, 26 for the hang-up dell light the glow plugs to a minimum.

[legendaryslave]

Hello
You have to cut the pin 59 to line immo, 26 for the hang-up dell light the glow plugs to a minimum.

exactly you place the tested file do know
http://www.professionalchiptuning.ne...5167#post75167

[cinqueturbo]

Guys Thanks A Lot!!..

[ducati83]

Guys can I have a ecu with e2p L9637d? in this case, how do I scodifica total?
thanks

[sportknight]

guys I have done the procedure specified but the drive part and remains slightly accelerated but the throttle does not go,I have to do some adaptation or coding the injectors?

[fuorigiri]

hello I have made a last week all ok review some of the steps

[fuorigiri]

to scordavo a little trick you can try it without the e2p you drovrebbe starting but not in power, and a way for x to test the ecu saw that remains accelerated