Hello guys, I have this problem and ? the rare,this C3 1,2 when I press the clutch pedal and then I leave the machine off, we checked the structure of the electric changed the interutore clutch m? the risultado does not change.. any advice would be well accepted..
errors in the ecu?
hello, diagnosis of engine management do you find the errors??
You do not really understand something until you can explain it to your grandmother (Einstein)
I watch it with the oscilloscope l square wave of the crankshaft sensor when you press the clutch, I think of the shoulder shaft
guys, everything ch? you have mentioned the fact,in the ecu, not get no error's? detach the switch from the pedal that fault, not the f?...
a clean body aspiration with learning?Originally Written by todos
don't base only on the memory failures in diagnosing analyzes the real-time parameters not, and said that the ecu alone is able to see the result
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
The throttle body ? been changed, we also controlled s? there was air suction analyzed all the parameters,I try tomorrow with another unit and I'll let you know...
hello, have you checked when you press the clutch with the tester if the voltage drops a lot , if I remember the switch ? powered by a positive and then the thread back if pressing the voltage would drop very there may be a short !!
if you have done all these tests you mentioned,can? be the problem of the control unit,let us know!!
You do not really understand something until you can explain it to your grandmother (Einstein)
Write permission
Quote