Eliminating motorized valve Audi a3

[ecutano]

Raga hello , I wanted to ask you a question ? can exclude the control in the engine control unit to the motorized valve on the intake manifold of Audi a3 20 tdi , I have this need to avoid to replace the valve that is broken , possibly I should also delete the DTC , as the valve has an electrical problem at the sensor location.

I am attaching the file ori.

Thanks

[munro]

sometimes I ? happened that excluding the egr controls the soft-top not go down more...
you can try...

[ecutano]

Hi , the EGR ? gi? excluded , but there will not be? in a way, like the one for the JTD for the valve to Swirl ??

[biondo83]

I say to the family of the ecu is the file that you attached? unfortunately I can not download the file, and I can't do any comparison. Thanks.

[magi1984]

you first disconnect the plug of the valve, see what? the dtc, and delete it
usually the error ? p2015 if I remember well

[blueangel666]

For the EGR failures are P040X.... where X is precisely the type of error....it depends !

[munro]

the most that the error code P0 relative to the soft-top you need to know the error code vag 5-digit.....
in order to be able to search for in the ecu more easily and disable it..

[legendaryslave]

you first disconnect the plug of the valve, see what? the dtc, and delete it
usually the error ? p2015 if I remember well

you've done so on a ducato only flaw I had to leave the part electrical attacked otherwise, recovery without a light

[blackwolf76]

Eliminating the dtc to the problem should not be there, at least in this way I solved lately, without changing the valve that goes to the wayside more often.

[ecutano]

Hello , now I don't remember the DTC , but as I once read the error code to search for it and delete it permanently ?