ECU marelli for panda 1.3 75hp DPF - probably broken

[emilground]

Hi guys, probably I need a ECU marelli for a panda 75hp DPF (tomorrow I know? if you really ? route or not). The data reported on the original ECU are:

NEVERTHELESS, 6F3.A5/HW03R/3454-A568
Panda 1.3 SDE 75HP DPF B_CAN
6MB-WJU8I

If I were to serve, someone holds it down? riverginata and ready to install? (okay, also a version without the DPF, if you can? to mount, since that was already? removed in the past)

[giuseppe1374]

do not create you have posted in the right section

[emilground]

you can? move ?

[emilground]

I connected the ecu to the car and part, for? I can not read it in the serial (after about 80 minutes I from a file of 0 kb), yet ? a 6f3 online can and should be able to be accessed by giving a file that is 2.5 mb (such as the lancia musa, which I have done many times). I used the fgtech V53. I also tried to open it, remove the resistance from 0 ohms and read it in the BDM with the v53 and the v50 but nothing to do, it does not communicate. What might be the result ?

[cristianbomberos]

Funny that the bdm does not communicate,why? if the vehicle starts...I would not like the pin of the e xxx will not make good contact to me ? happened to have some little shits,then I have tried several times to read in the serial but sometimes they don't want to know

[emilground]

to make contact definitely do it why? first I tried it with the spring, and then with those of the weld, and even goes. In serial from read errors but in the end I find myself with a file that is 0kb in size and as much as I ? was also said those who preceded me in the same operations has had the same problem.. so ? a mystery, we do not understand why? not the law

[cristianbomberos]

Strange for? really very, very strange
sometimes things happen really mysterious with the electronic