Problem Ford Focus 1.6 TDCI

[cristianbomberos]

Hi guys,

I have a problem with a Ford focus 1.6 tdci practically every time you turn on all the lights on the dashboard instead of the km are all liniette and does not take throttle,diagnosis gives me error can line the accelerator,break, stop,break, clutch and failure to communicate with the instrument panel, I also substitute the pedal, but the result does not change

Do you have any idea?Of course, were checked in all the masses and the pin out of the ecu

Thanks very much for your cooperation

[rego88]

this ? a problemone.... 100% safe c'? a control unit fails in the line can... have you checked if you find any ecu connected but is not communicating when you are presented with the problem??? I'm on a gt 1.9 jtd, it gave me a failure in abs, asr, code on the picture and the car would not start.... in diagnosis the engine control unit was connected but is not communicating on the can line when you had the defect

[dariuccio]

I first controlleri before the alternator and the battery. with electronics, just a drop or a voltage surge to make her crazy.

[nicospl]

has had water leaks??

[sno74]

post some more of the machine but most of the times on these car ? in the framework of problems.....

[rebirthafterrevenge]

the ecu has the original file?? maybe the dtc does not see them proprioper the file that does not ? ori!

[polini]

check out the picture... ? connected to the ecu with the ignition key code immo

[michele30]

as has already been said polini, I would check the picture , which of them acts as a body to me ? 've a problem on the power steering and in the end it was him that was crazy.

[yannsaba]

post the fault codes if you have them available, a defect common on the focus... let's See if we speak of the same thing. However, this is probably the loss of the encoding variations to be solvable with telecodifica through the official ford. Happens to you every few starts, right?? Anyway, let's see the fault codes and try to understand better. It was written is in the car or ? ori ? if you with that tool and was made???

[cristianbomberos]

Thanks Guys you were great in the answers I solved it by fixing the instrument panel I opened it and I found several broken welds