EDC15C2 PSA - EEPROM is corrupt - content lost

[matech]

Hello all,

wanting to do a favor for a friend I came across a nice casino:

peugeot 607 2.2 hdi 133v edc15c2
HW Bosch 0 281 010 567
I had to unsolder the eeprom 9p05c3 to report on the number of deletion errors to zero, since? they had reached the 51...

proceed as usual, only this time the eeprom me chips on two of the angles between the tweezers.
Leaving aside the prayers, I have already? found another 9p05c3 from another edc15, welded, read, reach across to ff and risaldata.

The car is in motion, but you can't do the telecodifica of the configuration of the ecu through the diagnosis PP2000:
do I configure everything, but when ? the time to save all the settings (cerina, transmission type, etc.) gives me communication error.
(the diagnosis works well, doesn't it ? its malfunction)

I tried to do the telecodifica as if the ecu had a spare virgin, but it tells me that the ecu ? gi? encoded.

then the game gets harder!
what can I try do you think?

I have some program of scodifica that on this ecu (comb only) I is the total from the flash, or when I see that one to me, also as a "PIN PROGRAMMER"

does anyone have a dump of the eeprom to try?

thanks.

[matech]

I forgot: I 3 permanent errors, engine management

error telecodifica
2 errors inherent in the antiavviamento

[msport (exil77grande)]

for the telecodifica I can't help you, while for the 50 cancellations, I can say that I have done something like 30-40 dissaldature and welding and are not able to bring to 0 the counter or otherwise there are successful but not part of the machine, or vice versa.

[giarras]

I'm so sorry x our friend, as I understand it ? ran across a nice scab.

[legendaryslave]

this is a file that is read from your ecu to the rivergini ? proceed to let them know if there cable something

[legendaryslave]

a some but this has reached the limit of 50 cancellations

[andra170]

you have to try with a total

[cele]

But sorry you have lexia available and you have unsoldered the eprom to reset the maximum limit of cancellations

[matech]

Thanks guys for the help!

so, I just found myself the first file, and it comes from an ecu with the same HW and sw is different.
the second, instead, it seems to me bad bed....

vabb?, I think that the first one can be gi? a good material to start with!
I have two SW now, ecuv makes me the total from FLASH, meuc I see that brings the total, but a "95080"...what ? equivalent to the 5P08C3...but does not speak of "vergin ecu"...use the meuc then?!
From what I understand, also, ecuv is also a "Pin Programmer's guide", I also perform this?

*cele: we've lost an hour and I have not figured out how the hell to reset with the PP2000!!! If you explain it to me thank you!

*tuttiglialtri: thanks!

[cele]

preparation vehicle new procedure is rather long