I have done some mod to the map of this bmwe46,
I had a map with more light and the car was fine, now I wanted to push a little more, but it seems to me that instead of push a little less...
the cio? the starting point c'? then how to map the pedal to the reaction of the pedal takes it well, but if it sank, it seems to me that we push so much, if they are low rpm, say about 1800 in the fourth thrust a bit, I also smokes behind.
give me please some advice if I've done something wrong?
I thought I'd muovore advances but I've read that not all agree on this thing.
look your advice
hello . you have to see the lim torque , you touched off the map. rail high with respect to the limiter rail , I lowered the pressure or raise the limiter rail. give it a try and let us know
hello, but the rail where it would be the most high^? 16500 rail and 16500 limiter
the torque limiter out of the driver, it seems to me equal to the other, then as a mod. also
Nn I'm telling the lim couple out dr..... At the end of the map lim pair you have a low hump that you touched on, the ones I am referring to.on the rail if the value of the lim and + up then place. L,have you written it?
what indenti as low hump, that ? too little l increase?
it is the written and as I said above the machine as a starting point c'? but as I thought I made something more
you say, and 8284 e8330 I honestly do not know, but the driver keeps me in a good map up to them, then I've done the mod up to them, but I don't know what it is..
you say that I need to arrive only at the end of the first curve?
then you say that ? bastagliato the driver of the ecm?
it seems strange to me, however, seeing that get them there I did the mod. up to the end.
for the fact that when it sank in, 3, 4 or 5 makes me smoke behind what can be ?
Quote
