Hi all, I have in mind to do a bit of diagnosis and set the best parameters of my system lpg Landi on giulietta 1.4 tb I would like to build the interface seen that costs a bit of plastic and 3 capacitors put together, I found a diagram but it is missing the final part of the connections to the jacks, so I wanted to know if anyone has done something like thisSchema interface landirenzo landi renzo omegas methane gas lpg cng ALX.jpg
find for two cents on the network with sw
if the standard installation, you can enter and see the errors and parameters, but you can't change anything.Originally Written by Luigi
only the minimum and the manual pressure reducer
you can act from the map ecu gasoline
Last edited by msport (exil77grande); 23-09-2013 at 19:19
but from the map ecu gasoline adjust the quantity of the gas.
the ecu of the gas follows the map with gasoline , even though it still says the lambda control , the advances can be varied to optimize the operation gas
If I'm not mistaken the ecu pi? recent Landi Renzo who manage gas systems only work with the hardware key, if you don't have it also with software cable and interface can't connect
Write permission
Quote