Page 1 of 3 123 LastUltima
Results 1 to 10 of 30
  1. #1
    BEGINNER
    Date Of Registration
    Jan 2015
    Messages
    72

    Opinion the map giulietta 1.6 105hp

    Hi to all,I did make this map where it was done luca stanca the egr off and increase performance

    the problem is this last point,the performance increased just a little,I wanted to ask if someone could take a look and tell me(with winols where can I find the curves on the times of injections and limiters and turbo pressure)

    I attach the files:
    File Allegati File Attachments

  2. #2
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    The ECU should be a EDC16 c39 but the file ORI does not seem to me like the original so I can not see how actually the mod differs from the original. Try to provide HW and SW in the ECU. From what I've seen, the mod is not bad. But I repeat, I do not understand what has been incrementeto. The limiters torque, rail, and turbo could go well. The injection time if you don't know how to move and if the map is not too push them toccherei. BUT.... we hear someone more brave!!

  3. #3
    BEGINNER
    Date Of Registration
    Jan 2015
    Messages
    72
    The ecu is a edc17c49
    Use winols to see the differences?

  4. #4
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    You can use WinOls more professional or ECM Titanium or any editor. Loads of first GOLD, then mod, and, once opened, can see the differences.

  5. #5
    BEGINNER
    Date Of Registration
    Jan 2015
    Messages
    72
    For me, that I am novice to recognize the curves is not easy,it takes me a long time without damos or driver for winols.
    But now I see to find something in the network

  6. #6
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    the ecu and a edc17c49, and was removed the Torque Monitoring maximum torque , and a modified pedal - turbo - an overboost - pressure naphtha - limiters press. nafta - and torque limiters - removed egr and fap, it seems strange to me that the change feels very little, in any case, you can ask whoever you made for clarification.
    ugo ---- president A.E.P.

  7. #7
    BEGINNER
    Date Of Registration
    Jan 2015
    Messages
    72
    ugoboss but with that program you see these changes?
    I use winols, but without the damos how do you recognize the map?

  8. #8
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    acknowledge to the eye, after years of changes, let's say that at least the maps main you are well :-)
    ugo ---- president A.E.P.

  9. #9
    BEGINNER
    Date Of Registration
    Jan 2015
    Messages
    72
    To recognize eye I could take as a starting point this guide?
    To send more fuel which maps should I retouch?
    File Allegati File Attachments

  10. #10
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    the guidance for an ecu vag (and an audi) you have to hands a ecu fiat group, even though all 2 edc17 are very different, and especially are different on some of the logic of functioning, that said, I say to you that to send more diesel ppotresti intervene on the injection time or pressure naphtha, but the wrong edit maps so ridiculous, to make a change we must start from the request, i.e. from the pedal, then you go ahead and you modda all you need but always according to the request of the pedal, so if you want to make a good change in the care of a expert, you can also feel the online service of this site, or someone else, and remember that to do damage to do tests in a moment.
    ugo ---- president A.E.P.

Page 1 of 3 123 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •