I try file ori to be loaded on the Golf 5 1.9 105 CV HW.0281011900 SW.1037371094

[Francesco82]

Hi all as the title I try file ori for golf 5 1.9 105hp 6-speed engine bkc with the ecu HW.0281011900
SW. 1037371094
Upg. SW 03G906016CB 6176 after you have broken for the second time the turbine as I bought it already mapped and allowing us to put a turbine oversize to be safe I would bring it back to its original state because after having made it fit the car holds before entering the pair, and then smokes a little

[gimarras]

hello. see if it goes well this.

[Francesco82]

Thanks for the file but now trying it to download, I realized that I can't do it because I have not reached the 80 messages in order to access the download I guess

[gimarras]

if it is not against the rules let me a contact and I will send directly.
ADMIN, can you?

[Francesco82]

I would like to receive it then if I can I post the file of my ecu that is already mapped if someone can control it because, in the years after the collapse of the turbine 2 times I noticed each time a huge decline in performance, the first after having moved the injectors from the pompista for a cleaning with installation of new turbine and the second turbine plus now you hold before getting rid of the third, while in the second salt in fits and starts when I try to pull it

[Francesco82]

Good morning, here is the reading of my golf if anyone can help me check this map and give me advice on seeing my lack of experience

[gimarras]

You have to attach the original file, otherwise verify what has been changed is almost impossible.

[Francesco82]

The problem is that I don't have the original file, and I thought that facendomelo send you could compare it this is the file that you downloaded from my car but it was already purchased so and I wasn't provided nor mentioned that he had the ecu done I noticed driving it and comparing it to the other that was a little too much for my tastes

[Francesco82]

Another question having another golf same if I check the data of the hardware and software of the control unit I can use that as the original file?

[cinqueturbo]

You have to attach the original file, otherwise verify what has been changed is almost impossible.

Not lai loaded you in the second post??