Hi,
after luca stanca and EGR off , the car title (With BOSCH EDC16C32) shows the error P2084 with recovery. I tried to delete the DTC but before it I wanted an opinion from who knows more than me. I'm not sure that it is enough to hide the DTC in the ECU. The luca stanca has not been executed well? I used a software and then passed back "hand" based on another file that is modified and tested previously.
I attach an ORI, a mod 1 with the error and mod 2.
Thanks in advance
the error concerns the temperature probe, I don't know if removing the dtc on the machine exits from the recovery, I don't think, I don't know that sw was the fact the file, some allow you to disconnect all the sensors, others want them attached, I on a to not replace the sensor the "staccato" and I put a good resistance so that the temperature is around you 70-80 degrees, in any case, you can try to do dtcoff or disconnect the probe.
ugo ---- president A.E.P.
On the Mercedes it happened to me . A friend gave me a file with *******h and I solved the problem .
OK Boss. In the meantime, I will try to unplug the sensor and review the file.
Of course, with a good software to solve it , but I want to try it without. with the second mod I see that there are two points that are modified. I don't know if one is the DTC and in the other, and the switch-off.
Write permission
Quote
