Increases in map in the ecm alfa 147 jtdm 120cv 88cv edc16c39 005

[simonemora]

Hello, for beginner I am going to remap my car in the object step by step.

I ask: if you start with increases in percentage, it would be wrong?

I changed: - pressure turbo, and the rail with its limiters, a hair of the injection and the torque.
Can I post to get opinions?
Thanks to all of you!

[ugoboss]

mail the original and the modified, and let's see if someone intervenes.

[simonemora]

Thanks a lot! Here are the maps of my first step, welcome opinions and advice to improve it....
I would like to create a map of soft right to "optimize" the performance

[cinqueturbo]

Thanks a lot! Here are the maps of my first step, welcome opinions and advice to improve it....
I would like to create a map of soft right to "optimize" the performance

Map Pedal x4 ok, you can apply more blurring to the High
1C1674-1C1F3E
RPM/NM

EGR
1C4B70-1C4B84
1C4C3C-1C4C4E

Lim couple parts too soon, you need to claim the NM as the maps pedal
1CBD2E
RPM/NM

Map Conversion mg3/NM see a file 140-150hp
1CDCE6
mg3/NM

Lim torque to the gear do not touch, you are already off the scale
1CE5F6-1CE786
RPM/NM

Press Turbo you basically gave 00,13 mbar can you give 120-150 mbar
1E102C
1E1468
1E14A2
1E16E2

Press the Rail ask for too much too soon
1E6474
1E694C
1E6C0C
1E6CD2

Swirl
1E6FE6-1E709A

prepare a step that I follow you...

[simonemora]

Thanks a lot!!!
Unfortunately, Ecm is not just the maximum, over this map, I would like to learn win ols.
I ask:

Maps pedal the increase, even above the roof of the 90%?
From below, a 10% gradient towards the high?

Limits torque to gear leave the gold?

Rail pressure where advice? 5% to grow okay?

[cinqueturbo]

Thanks a lot!!!
Unfortunately, Ecm is not just the maximum, over this map, I would like to learn win ols.
It is not the software to do the job but your wisdom & experience.. I also use ecm,winols,and other that I make your job easier..
I ask:

Maps pedal the increase, even above the roof of the 90%?
From below, a 10% gradient towards the high?
I don't understand how you mean..let me see..
What you see in the map are real values and calculated do not use % but uses logic..
how much do you want 350-400-450NM??
Limits torque to gear leave the gold?
you are already double that of the request as possible..

Rail pressure where advice? 5% to grow okay?

What you see in the map are real values and calculated do not use % but uses logic..
how much do you want to increase the pressure and where and why?? 300-500Bar?? do not exceed 1600.. already high for those Rail..

[simonemora]

Great advice, were things that I didn't know.
I repeat, I would just like to "optimize the map" in a soft way to earn more brilliance, alertness and body species to the low.
I do not know the limits of how far I can push things, I will and put...thank you so much

[simonemora]

I have not understood what it means to Swirl 1E6FE6-1E709A also because the ecm doesn't appoint those curves of the turbo and I don't know how to change them.

the egr is closed and the changes made according to your instructions....I look forward to feedback (step 3). Thanks!!!

[cinqueturbo]

I have not understood what it means to Swirl 1E6FE6-1E709A also because the ecm doesn't appoint those curves of the turbo and I don't know how to change them.

the egr is closed and the changes made according to your instructions....I look forward to feedback (step 3). Thanks!!!

I was expecting of the other Simon.. there we are..
I have indicated many addresses that the ecm free you show, but in 2D you quietly..
missing the maps that you have indicated and continue to use the %..
The swirl are the blades that split the engine and must be cleared as the EGR.. search the Web..
EGR lai closed with a few free software security holes manually so you learn to use the 2D mode..
the software to edit it has a lot of features that will make work easier, you just have to learn to use to their best advantage.
aggiornami..

[simonemora]

Perdomami. Then, rifaró all in 2d without using the %