replacement body piat point

[blackwolf76]

I have a punto 1.2 8v 2004, which has the eprom route in the body, and then I can not retrieve the data key, and all the rest, then I have to change the whole kit. The problem is that I have not found one which is completely compatible ****llo of the code. I got one in demolition but in addition to start the engine nothing worked.

I found online a kit that is very similar but change a code of the body.

My has:
iaw 5af p3 with body 51735169

while the online has :
iaw 5af p3 with body 51735160

Would you know if it is possible to interchange or there could be problems??

[cinqueturbo]

It seems to be an older model 51735160 I don't know..

time back I have changed some on the 1.2 16v 99-2000 but I have not saved the codes..

I remember that I realized a kit for the 03 and it was with the double probe and the sensor shaft ranges while on my no..

[blackwolf76]

Unfortunately I do not have all those tools you mentioned, Leonardo in the first place. That body with the same number I found, but mounts usually on the 1.3 mj, and then I wouldn't have been sure it would work if I mounted on this gasoline. However, I bought the kit just over 150 euro shipped... hope the functions.

[blackwolf76]

Mine is the model with the huge headlights and, in fact, should be a model in the following, let's say after 2004. I found a kit of the model pre 2004, but it was not working power steering and the instrument panel. In practice, put in only the bike. About the code body you're right. The seller has made a mistake writing and checking from the photo is identical to mine, I should be safe functions at this point😜😜 tomorrow should get.

[blackwolf76]

thanks matteosr for availability. I got the kit and everything works, apart from the alignment proxy that I have had to do with the diagnosis.