gi?, unfortunately, not c'? not much margin on the turbine, and also for the fact that the management ? mechanical
you can give a p? increase to medium, but high enough to make it smoke
gi?, unfortunately, not c'? not much margin on the turbine, and also for the fact that the management ? mechanical
you can give a p? increase to medium, but high enough to make it smoke
how many mg injected total starts to smoke a mjet 70cv stock?
Would be interested to know also to me.thanks
making a map deceived do not know the precise value, I have never been made to calculate it
we say that a +12/13% on the injection time to rev up the intermediate, and then drop to +6/7% in the high
in this way, smokes slightly at full load, but still accettabilissimo
in fact, I know that you do not smoke more? of the original
Speaking of car stock,
a client of mine with panda 70cv demanding and aware of what was going in against
I have disconnected the wastegate then correct the map based on the turbo pressure to keep it from smoking..
stable pressure of 1.55-1.6 Bar injection time with almost 22% in the pi? with injection phase correct..
is circulating from the pi? 2 years almost 3 without any problem,
even getting already? a turbo to replace in case of need, but in vain..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
five of how many degrees ( if you can? know) you have fixed the advance?![]()
Ela.Toretto
I don't remember pi? should I re-calculate..now I go to the eye..
Tempi.jpg
Tell m'?.. varies from turbo to turbo,or car to car..
you hear a slight whistle but nothing of that, and the like as well..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
But +22%), also the last curves? I have a KP35 with impellers and increased the derivation of the Renault, but still more than 15/16% smoke with 1.35 bar constants