marelli cdc clone

[gcmotor]

Arrived a few days ago

I have yet to try it in boot-mode. Today I made several tests in serial with 5.9 M, which is 5AM and I have to re that ? very stable and reliable. The read and write times are the standard for these units.
I tried both to upload files to 320kb format .bin files from 304kb format .hex and in both cases it works. It is curious that with the files from 304 first perform a read of the boot of the controller (at least cos? writes the SW during this operation), and then write the flash.
One thing I do not ? success: the changing of the date of programmazion of the control unit. I have uploaded the file e2p (where I had modified the code tester), uploaded the file to the flash format 320kb but I only change the code tester... there giocher? still figuring out how to do!!

A few question for those who already? the usa: to put the boot in the wiring kit with free cable I have the cable for the bootstrap. Should I add it myself?
Simply adding a wire from the cable of the negative that connects the metal body of the control unit with an alligator clip to and point to the pitch of the bootstrap?
On the ecu, do you prefer to use as a negative pin 10, 34, or both, or ? indifferent?

M999

I fixed it, just like I suggested

I peeled the negative and you ? the treaty of a simple addition of a thread that I have linked to one of the two ends? an alligator clip to that will be? to attach to the metal body of the unit. On the other end? the alligator clip to I connected a second wire with the end? to the point (simple needle of steel), the pitch of the bootstrap.

M999

Hi I have bought this interface, in boot mode I have not tried it yet. I tried to read a Marelli ecu, ducati monster in the serial but nothing. It is as if the software does not see it. I wanted to read in boot mode, but the inside does not seem to me like 59f of the fiat punto, to understand, and I can't find the site for your boot

[rdponline]

Fantastic and I use it almost every day, never tired to read and write, then clone file in hw different generating a unique file for that hw... shelter the 59f and 4af then use it every day... a bit slow, but dependable, in comparison to other interfaces that I used... they gave me only problems...

[m999]

I should have the same that took the user a coma. Also I confirm that it works really well and ? a simplicity? use disarming. We agree the software and error-proof. Tried with all the ecu that declares the constructor and doing various tests on reading, writing, immo, etc., and to this day, has not missed a beat. I would say very good.

You can't give directions for the purchase as required by the regulations, the more so if it is c---. Looking good in the network

M999

[gcmotor]

Hello guys some of you I can? send in Pm the link where you have the Clone, I would like to see it. Thank you in advance

[leandro89]

Hello guys some of you I can? send in Pm the link where you have the Clone, I would like to see it. Thank you in advance

as a gi? said by cinqueturbo read the rules and attention to the requests

[cinqueturbo]

1? The Pm does not exist pi?..
2? it is forbidden to link-are external sites that deal with Chip-tuning
3? and will not discuss, and post HW and SW clones..
4? Re-read the rules

[gcmotor]

Ok okay

[munro]

sorry if dusted this discussion but since I would be willing to take the cdc marelli wanted to ask that already? c'? the has how it behaves with the marelli m6jf and m6f3....
if you have had the opportunity to try to read, write everything with these ecu in particular....and for the mj8df?? what do you say??

[rdponline]

The 8df makes them not because they have jtag protocol and the cdc marelli suppprta only the 6jf, but I can't take you experience about it because for the marelli 13 mjet use kess or ktag the cdc use it only for 59f 5af

[crteam]

The 8df makes them not because they have jtag protocol and the cdc marelli suppprta only the 6jf, but I can't take you experience about it because for the marelli 13 mjet use kess or ktag the cdc use it only for 59f 5af

raffaele your c---and?