a little offtopic: be careful not to upset the admin... just a few words to the good connoisseurs.
a little offtopic: be careful not to upset the admin... just a few words to the good connoisseurs.
Last edited by Fedex; 03-09-2013 at 23:23
Weller, the brand ? good. I can give an opinion only after I use it. At the end when you see them are many bottles that say nothing. Just trying understand if it works and after that it works how much effort do you do to remove the residue, if it remains the pcb sticky... I am using the station, IR, before the use of amtech, I noticed that some were very and the type is "burned", with the consequent that the pcb was dirty and the welds are opaque and stained, while with amtech the speech ? different. For the welding rod to use one that I bought from a vendor(while I bought other stuff) and I always respect those that I used before, this ? spectacular, smokes a little, ? transparent, the residue ? next to nothing, and the welds are clean, polished and shining. After these processing, it would be a good thing to clean it with a cleaner ultrasonic... and here I'm doing a little thought.
I have a workshop on electronic design, where we also do repairs, so the instrumentation must be good. In addition to what has been said, now, waiting for the ultrasonic cleaner, use acetone or isopropyl alcohol(for pcbs). I will say that when I first started to try to resolder the chip of the video cards I had, and I have a nice round of interventionsthis has allowed me to invest more and more? in the instrumentation.
You say?, in the jump to "serious"? then the one that we use pi?, in addition to the sponge (do not use) c'? a container with of the retina(it seems to me that both of brass), 2 dives in the in the retina and the tip ? perfectly clean.
you can find it everywhere, not to be advertising? you step link 2 link of a famous multinational company:
http://it.rs-online*****/web/p/access...ature/6699154/
http://it.rs-online*****/web/p/access...ature/4952775/
Nice set of tips. However, you have to have a good manualit?, otherwise they have wasted any type of soldering station. The GBC-I have never bought, but I think that this retina ? very common, in my welder ? included in the equipment.
I have this:
http://www.jbctools*****/cd-s-precisi...-1-menu-1.html
as the welder tip. Then the battle I have a few styles, but these I use them for things that are a little more? big where you need lots of Watts to work.
Ehehe, JBC to life! I used the one from a friend several times, this one to be precise : http://www.jbctools*****/ddst-rework-...-1-menu-1.html
I was stunned by the speed? with which raggiugne the T operating, and how to keep it constant-whatever you do. But we're talking about a station a thousand € I know.
Then must be understood, I have a chinese 100€ and I never had any problems, I go a little more? slowly but I do the same!
I paid 600 bucks, and also was granted.... Some took 2 tips, and as you say, the nice thing is that he takes temperatures immediately, the time to raise the stylus from the port and the stylus already? ? ready. With the tip the most? there balances the any and I think that the resistance works in pwm why? in the dispaly c'? the load index ? very low vacuum and just put the tip on a surface (for example pcb, wires, lugs, connectors..) this salt is up to you to keep the temperature constant. Considers that this is the taro of the standard to 330 degrees and I go to god, while with a station weller, I keep it fixed to 400gradi. When there are troubles in the pi? I have in mind to buy the caliper and if I can another station, but the 75 or 90W.
You don't need the eye if not the you have. Use your beautiful sponge, provided? do you remember inumidirla or, if you're very fast, get on a normal tissue and a colpettino you can give to clean up the tip.
Pu? be the pond that you're not using ? the top. Usually in both systems, I still glossy.Originally Written by porter
Write permission
Quote