EDC16C39 - cloning

[alfajtd]

It's great that you're successful, sore, which was bypassavi contacts
And you're looking for other areas to read it...

[gcmotor]

I know the cloning pu? only be possible with units identical, even if we change the number. I in the past, I've made and they work. of course, all read and written in the bdm

[faberecu]

see on the old ecu to us sone of the ic similar to the Plcc is dissaldano for the vibrations often in 5 min you solve the tragedies , watch the welds with a monocle 20X costs 5 euro and if you know how to do it risaldi all , on the bmw ed16 ? a failure of the applicant

[baraldino]

Well if tomorrow I can control

I forgot
Thanks

[eismann]

therefore, I have mounted the BDM backup of a 159 with code 0281015160 1037394532 in an ecu that originally had these codes 0281013138 1037380494, I simply made the scodifica part of the e2p, and recoded the injectors, everything works, no error

[tranky]

therefore, I have mounted the BDM backup of a 159 with code 0281015160 1037394532 in an ecu that originally had these codes 0281013138 1037380494, I simply made the scodifica part of the e2p, and recoded the injectors, everything works, no error

I don't know if you've noticed, but the discussion is almost 3 years ago. Anyway thanks for the info, and of course, there are compatibility between the ecu hw and sw are different and which are listed on esitronic.
So much for clarity of information, because it has been refreshata the discussion.
Ciaps

[ugoboss]

therefore, I have mounted the BDM backup of a 159 with code 0281015160 1037394532 in an ecu that originally had these codes 0281013138 1037380494, I simply made the scodifica part of the e2p, and recoded the injectors, everything works, no error

if you put in your backup that need you to do a partial, and recode the injectors, you have everything you need in the backup.

[salvatoreragonese]

if you put in your backup that need you to do a partial, and recode the injectors, you have everything you need in the backup.

Hello ugo, just before I was talking with a friend of this thing! if I have two controllers and I have to clonarle because a already mod and the other is not if I'll get all the backup c and need scodifica, because it is all in the e2p right?

[ugoboss]

Hello ugo, just before I was talking with a friend of this thing! if I have two controllers and I have to clonarle because a already mod and the other is not if I'll get all the backup c and need scodifica, because it is all in the e2p right?

exactly, throw in the backup and you're right, of course, the two ecu must be compatible with the hw.

[lsdlsd88]

exactly, throw in the backup and you're right, of course, the two ecu must be compatible with the hw.

aspettta but he says that should not scodificarla because the data immo are in the e2p, you tell it to write the full backup (you must also e2p).

agree!

because I have doubts about the fact that you can ONLY write the flash of a sw version is different, it is possible that the structure of the data in e2p has changed, and, therefore, are not compatible with each other.