With mpps v12 is how.
Very strange that says "encrypted". Sure you cut well?
With mpps v12 is how.
Very strange that says "encrypted". Sure you cut well?
well cut and I have also tried to fix the chk upstream for curiosity? place the two files ori cut and not.... maybe I was wrong to cut it for me... you should write mpps can consider the k-line
the file ? by 448kb?
is a can protocol and do ecu data
I have made these in the bdm....
You do not really understand something until you can explain it to your grandmother (Einstein)
You with bdm you ? pi? quiet.
New evidence of mpps v12 for the 6f3 lancia ypsilon: read without problems, and file from 1mb... write always crashes in the same way, to 52%. Try to avoid them.
The cock instead perfect in serial... Just very slow...
the v12 ? note for the small problems on the 6f3,sometimes you have to try 7-8volte to make it write,even if it is with the rooster do not have problems
GALLO ORI + KESS V2 ORI
This time I have lost a lot of time.
My impression, having regard to the tests done the previous time, not ? much of attempts to do, but that the protocol is incasina in something with the file.
Previously guarded the ecu with the original read by the magpro and cut to 1mb.
That file them wrote it without problems every time the sparavi.
The modificavi, nothing to do: 52% blocked.
To look at the file that is read by mpps from 1mb and cut derived from 2mb you will notice the difference in the second half? of the file, where the read with mpps was practically empty, while the other with data.
This time I had read with galletto and prepared the file to 1mb, but bench? a comparison of the story was the same, that is, from the second half? there were data, not written by sticking always to 52%.
Sin why? the 12 taken to the spear with 6f3.
It would also be fast...
Maybe the later versions have changed something. Would try.