remapped punto jtd 1.9 file 955-392 EC 15

[vince59]

waiting for the cable, I got some questions.
1. to read and then write the data with the chinese clone I have seen that there is provided a dedicated software (new serial ); there is another that I could use, or you have suggested for read/write?
2. if remedy for an ECU with the same hardware code (0 281 001 955) but with different software, I can put in the software of my own? In other words, I would like to "fix that and play" with another unit before risking ruining my. Can I simply disconnect my and connecting the other?
Thanks

[Errecinque]

waiting for the cable, I got some questions.
1. to read and then write the data with the chinese clone I have seen that there is provided a dedicated software (new serial ); there is another that I could use, or you have suggested for read/write?
2. if remedy for an ECU with the same hardware code (0 281 001 955) but with different software, I can put in the software of my own? In other words, I would like to "fix that and play" with another unit before risking ruining my. Can I simply disconnect my and connecting the other?
Thanks

No, you have to first read the other scodificarla and rewrite it. But maybe being edc15 you have to open it, desolder and read with a memory card reader, etc..etc.. a mess basically, but expect someone more expert in scodifiche, it may also be that a total can be done on the flash

[vince59]

..I forgot. I saw that the EDC15 h several versions with the final letter is different. Are the differences significant? To me the diagnosis simply means EDC15.

[Errecinque]

..I forgot. I saw that the EDC15 h several versions with the final letter is different. Are the differences significant? To me the diagnosis simply means EDC15.

Some edc15 is a family of ecu. The hope is fiat wv Opel renault etc, etc, there is the p-series, and c with various numbers. Each are different and not compatible with the other

[vince59]

I guess you're right. I had forgotten that the mapping is only a part of the entire code of the ECU. Then shooting only the mapping avreisicuramente problems. I'll try to snag my same model.

[vince59]

Thanks, so my that with EDF, is seen as EDC15 and just I have to consider them such, or do I need to acquire some other data?

[dragusdrake]

Thanks, so my that with EDF, is seen as EDC15 and just I have to consider them such, or do I need to acquire some other data?

the programmer tells you which software version the ecu

[vince59]

the programmer tells you which software version the ecu

You've got me baffled, as the screen of FES comes out as follows, for which, according to me, the version of software is already identified I was referring to the letter which follows the model of ECU as EDC15 X....I do not have X then that ECU is?
fes.jpg

[vince59]

fes.jpg

photos

[dragusdrake]

It should be Edc15c2 or c7 , the c7 is perhaps the only fits the 85 horsepower, while the c2 is equipped on 80 hp