The eye that you need to configure it to well, he has a load to the clutch not indifferent.
The eye that you need to configure it to well, he has a load to the clutch not indifferent.
the problem to make it work with the map IQ in fkmh ? this...can you? limit the iq to 20mm3 up to 5kmh...but the point remains: even with 20mm3 up laps...lentamenet but salt of the rpm...at idle...why? the engine has no load....need something that is in the f engine rpm...
...anyway, looking on the damos...I found maximum input torque at the drive (there are two maps consecutive 16bit before lim torque gear to gear).
and also soon after always on the damos reports: vehicle speed thresold to deactivate torque limitation, a single value in km / h is set at 5kmh
here he is on gp120cv
http://www.youtube*****/watch?v=GRcVLGipZ3A
Proceeds my studio...su edc16c39, there are maps which I have indicated prima..su edc16c8, the maps mentioned above there are...I'm working on x to see if it works on edc16c39 in the way indicated, and on c8 with iq in fkmh...
Tests effettuate...su edc16c8 and c39
in the c8, I worked on the lim IQ in fkmh...but no, by limiting the iq 6mm3 the engine goes up to 3400giri....but it rises very slowly, and as soon as you also only x to move the car to maneuver, dies...
on edc16c39 I tried to moddare the two maps, the first of the lim torque gear to gear, but) great software...I jump out error at power on, and does not take the gas (error calculation torque inside)....
do you know if somebody managed to edc16u1?? audi to speak !
What is a hare? A rabbit Abarth
mmhh it would be cool... or as they say in the inglrsi:very coolOriginally Written by carlo abarth
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
Ciccio....if you can let us know...
what you need to know ??
Write permission
Quote