ford focus cmax 2008 90hp

[tranky]

But do you realize the address posted? do not give solutions to brettio so much to play.

Are the id which is the egr remover.
What they have wrong?

[tranky]

And the play I do not know to what you refer then personal opinions barn for you.
Help as much as I can and I don't do guinea pig for fun.

[cinqueturbo]

But do you realize the address posted? do not give solutions to brettio so much to play.

You will be wrong to copy the addresses..
important and that I discovered it

And the play I do not know to what you refer then personal opinions barn for you.
Help as much as I can and I don't do guinea pig for fun.

I'll tell you a secret and give my advice
not all but 98% of the EDC16 have the controls of the EGR immediately after the map Phase Injection
and here is the council foul manually when you don't have a software to height..

[tranky]

You will be wrong to copy the addresses..
important and that I discovered it



I'll tell you a secret and give my advice
not all but 98% of the EDC16 have the controls of the EGR immediately after the map Phase Injection
and here is the council foul manually when you don't have a software to height..

The council of gold.
Thanks friend

[perrysound70]

Ok thanks to all....but who has seen the map, I can tell if it steps wrong as I've seen with ecm?the map injection I say...

[perrysound70]

For the driver, just look for the manually "F701_199" that should be the driver of the ecu, at least you have the maps in check, for the file ori should I must have 80msg minimum for download..

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

[cinqueturbo]

Ok thanks to all....but who has seen the map, I can tell if it steps wrong as I've seen with ecm?the map injection I say...

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

I don't understand what do you want to see is not having the file GOLDS??

also loading the driver F701_199 see the maps etc, but not the changes...

[Errecinque]

But that is the type of driver you want to try with the Ecm ? I have tried a ecu focus the eoc's equal to my and also the type that I get from kess "77" and open it and see that it is completely wrong about everything....all the maps are unpacked so much?

Given that I checked only addresses the egr, without the file ori to compare with the mod how do you tell which is busted? I have to find the original file and then you can compare the increases or decreases made

[perrysound70]

2d are not ready.....or I do some testing....also, because I have seen that the surge pressure ( I think turbo) that have not been touched and are much lower than of the map turbo....possible that the "preparer "has made a mess?

[perrysound70]

Then there are other ways to remedy the file GOLDS ?