If the electrical part is in open loop is usually the first to have learned to eliminate the dtc, I put a resistor 100 ohm 1/4 w between the signal and ground in order to trick the ecu
If the electrical part is in open loop is usually the first to have learned to eliminate the dtc, I put a resistor 100 ohm 1/4 w between the signal and ground in order to trick the ecu
I didn't know of the resistance
Good to know
Anyway, the dtc I removed it thanks to errecinque that I have located and I put it to 0
Thanks for the info
Ok.... Available
On the forum there is all the material you need to learn. You are in the right place...Originally Written by Bennitro
I can not find anything relevant to what I have to do I..
Check in the diagnosis the percentage of opening of the egr ... If it's done well it gives you a fixed value-usually around 4% if it instead gives you values that change in percentage has to be redone..
Do not say stupid things....close the egr on edc16c39 is one of the topics discussed...
A229_039 egr off dpf switch off.rar
Flaw as this.
I don't think that with 9 messages you can download that file.
ugo ---- president A.E.P.
You are right ugo, I have not watched.....and I also lost 15 min to attach it from the cell that I took
Quote
