extraction injector 1.3 multijet

[blackwolf76]

along the lines of my, in the pi? I have one created with swing for those stubborn, just a colleague I sold one to a hydraulic jack type for psa, but I have not yet had the opportunity to test it for good. Then maybe you'll get an stuff like that and before you use the extractor you have other things to think about

The one in the picture ? mercedes engine, CDI... between the pi? pain in the ass with regards to the injectors, being fastened with a caxo of vitina 6mm that if they do not make good lose after two days and if you pull too much you break in, and then I know caxi. A sprinter he avr? redone 10 times the rontelle...

[lello123]

A simple method to release the injector and unscrew a ride to the fixing bracket and leave the car at a minimum, the calorie and the vent dissolves carbon deposits by unlock the injector

[checchitotiralaleva]

Also I have one planted... no?1... luckily sfiatava by the third party ? came away smoothly!

[legendaryslave]

from former mechanic in the workshop pompista when not to pull the injectors, svitavamo the coils where vanni attached to the pins, avvitavamo the extractor is quite massive and it came out even if it was welded to a continuous thread :-)

you c a l I I l extractor so that I modified by installing frequencies and fields to roam from a bodyshop 5 kg, inculatura on the spinter you have to hunt for the engine to use it on a classea I ripped off the head of the injector impressive I have is a movie when we get them to 5-6 people take turns giving each other the exchange, other than the gym

[Emanu88]

I also have it happens several instances in which nn came I resolved to always, or leaving the injector slow and the engine running and in the end you are unlocked and come off with ease? only 2 times I have gone to the trouble was a class c mod 203, and a class of 168 make own piet? them instead I had to disassemble the tt inuettore and with a special tool, mercedes filettarlo internally and with a press carrozzziere remove a lavorone

[gero]

I use the system I remove the electronic part of the injector mount an old attack of the injector mount on a swing in a two strikes and out,but you have to do mota careful not to damage the injector and do not allow impurities? of carbon residues

[dom86]

hi to all the class to make suffer cn injectors for? c sn different methods x pull them out and I, personally, or 2 artisanal fishing gears ke nn if they come out the inniettori it off via the head of the car I avoid x casini use a powerful degreaser ke drops below 40? and wrapped spakka the fouling when nn is using the degreaser x wash the engine clean ? them after 20 minutes nn use even the extractor

[gero]

but when the fouling becomes hard and also arrives around the injector between the head and the injectors do you do this?

[dom86]

I will always or extracted without difficulty? I anke candles routes cn the same system

[gero]

this is a release where to find it?