I've tried to make the diagnosis with Ducatidiag and Gallo 1260 , I made the connection as shown in the diagram is explained on the site but nothing, it does not communicate with the ecu. someone has already? tried this solution ?
I've tried to make the diagnosis with Ducatidiag and Gallo 1260 , I made the connection as shown in the diagram is explained on the site but nothing, it does not communicate with the ecu. someone has already? tried this solution ?
first communicated?
sorry maybe I didn't explain, the bike part by entering the code manually, but I was not able to make the diagnosis with the program, and the tool mentioned above, I do not have dedicated equipment so I tried..
ok I thought I did not have to go either....
good morning to all ! today I re-read the ecu with gallo 2 and processed the file with a prog x immo, can someone tell me the pu? say if it goes well, and I try to rewrite ? the file ? always 320 kb then the cock 2 does the checksum in the writing and I do not have this x driver ecm titanium, someone c? it ?
try to write it... and see if the part.. not damage you do with it..to the max and forgive everything as before..
but if the file is not ? good locks ? as I said before I don't know if the checksum ? correct
does not block anything.. then put back as before...Originally Written by klajdin
gi? the fact DemolitonMan, but nothing.. if I don't put the code part ? the same as before..
Qu? I enclose golds and 2 file test made with AETOOL & TIME
Write permission
Quote