kess mod.jpg
This ? a photo of the components that I changed my grip from a Russian forum
For the update can always be found on the other forum but you have to know the exact procedure to update the sense crashes
kess mod.jpg
This ? a photo of the components that I changed my grip from a Russian forum
For the update can always be found on the other forum but you have to know the exact procedure to update the sense crashes
well!!!!Originally Written by ake85
ugo ---- president A.E.P.
I gave it a look but how to say not all of the pcb are the same and the mod are different, we are missing several components, and the final test ? to make the tests with tools laboratorio..........
This ? a photo of the components that I changed my grip from a Russian forum
For the update can always be found on the other forum but you have to know the exact procedure to update the sense crashes
then the most recent version of the clone (2.13) is still not recommended since from what I read the 2.08 and still the best?
PS but someone also only on the 2.08 has the files inside that allow the virtual read?
it's not possible to add them if one does not have them in your programmer?
Thanks
The car that you can do, are related to the firmware of kess. So even if you put on their computers 2.13 but you have the old fw 3.099 I could read and write eye cross what you will find in their computers 2.06. With the fw 4.036 arrivals to their computers 2.09.
The their computers have the folder on their computers/res/ori empty, so much for the virtual read you should put in the file ORI.
Otherwise the program makes you save a TXT file containing version of HW/SW/Chassis VIN of the car that you are trying to read into the virtual.
I heard kess even without the SD slot and module Tricore... for which I do own all the colors.
According to me you have to leave this heard to say, most sincerely for your experience searched for the info and verificale, without tricore ok why? you do not have an active subscription, but without the sd card you're talking about another tool....
Who made the edit posted above of the components?
I have a problem I don't understand some little thing-es, in the last line says to put the tin-but where?
in most example, where c'? "white 1uf 35v case B yellow tantalum" what does it tell you where to take that yellow color to wear?
" others capacitors 10uf 16v yellow tantalum houses B " also here I have to take one yellow? but I found more types which can be go well with?
thanks
You must comply with the specifications 1uf 35V and 10uf 16v. Yellow or white will change the type of manufacture.
I can't give you a reason. On the internet, how do you know if you read all the colors.
Quote
