Opinion the map C2 VTS

[giannimini]

But then ep grease you take points? And to anticipate idem?
Wouldn't it be strange?

As ever, the values in both of the advance that the carburetion rise to an increase in engine load and rpm?
Guys if you take away points to the table injection skinny in my opinion,
Ditto for the advance if you take points off early...

Try changing the map for a time, according to me ? cos?

Then only by trying can you? understand what is...

[fabiovts88]

I in my well-known that in the carburation points to the increasing rpm decrease ditto for the advance

I made another under the advice that you gave me tell me what do you think if there are
C2VTS-OBD modificata.zip

[sergiot]

If you increase loads whether the values of the injection advance go up, don't you think that the aumetare of the loads and rpm the engine wants to turn the pi? fat and less pulled of advances?

calm, you are doing take the "frenzy modificandi" bad disease that causes us to make changes where they are not needed.

attention that I do not answer to you using your tools (I think ecm) that I have.
when I give you the names of mappings and functions describe what they really are, I don't use those fancy names that use ecm ( but at least 20% of the righteous), and I don't know which axes ve presents them

and also always remember that the units and the mappings need to work well the engines, and not as it seems to understand " the motors serve to justify what ? written in the mappings"

I in my well-known that in the carburation points to the increasing rpm decrease ditto for the advance

in the case of this c2 we are talking about
advances: increasing the points you increase the advance
carburetion: " in the maps that you are modifying" to fatten you decrease the points.

[Macchinista]

Here are? my modified map. In this case, I think I've put on a coat, and advance a little bit at low revs and correct the one that suggested sergiot. Correct me if I'm wrong.

Step 2 CITROEN C2 1.6 16V 125 HP BOSCH ME 7.4.5.zip

[fabiovts88]

who has controlled my last mod? I wanted to know .. this thing to give values to the opposite applies only to the bosch me? cm do I know when and or not so?

[Macchinista]

I know that the rule applies to all of the bosch family M, ME, MD, MED, MEV, etc...

[fabiovts88]

ook good to know.. you have given a look at my map?

[Macchinista]

Unfortunately, I am in your situation and I still can't download the attachments!!!

[fabiovts88]

sin ... we are looking for opinions then let's see if we got it

[giannimini]

calm, you are doing take the "frenzy modificandi" bad disease that causes us to make changes where they are not needed.

attention that I do not answer to you using your tools (I think ecm) that I have.
when I give you the names of mappings and functions describe what they really are, I don't use those fancy names that use ecm ( but at least 20% of the righteous), and I don't know which axes ve presents them

and also always remember that the units and the mappings need to work well the engines, and not as it seems to understand " the motors serve to justify what ? written in the mappings"



in the case of this c2 we are talking about
advances: increasing the points you increase the advance
carburetion: " in the maps that you are modifying" to fatten you decrease the points.

Advance carburation? Not ? ignition advance spark plug one of the tables?