I can confirm if mpps v12 you can at least write it?
I can confirm if mpps v12 you can at least write it?
You Mpps writes it, but you can't write another SW..Originally Written by ciullo.eugenio
Mpps writes only a portion of the file not the entire...
Then after writing see the flashing engine failure, normal,
do warm up the engine, and make three lunges at limiter and spegnei...
??? sorry... I did not understand
in what sense is it off? x?D I did not understand if it was ironic, I'm sorry xD
if you follow it to the letter, after this procedure the engine is switched on? not ? that fund?
Wait a minute you have to work on a IAW5SFHW300, I was convinced that it was a IAW59F..??? sorry... I did not understand
in what sense is it off? x?D I did not understand if it was ironic, I'm sorry xD
if you follow it to the letter, after this procedure the engine is switched on? not ? that fund?
But you have failed to read from serial port?
Last edited by leandro89; 25-01-2014 to 11:47
you ? a 5SF3.M1... then I did not understand one other thing, the program asks me to calculate the checksum <- you give me insights about it?
Be careful on the screen of the sw indicates whether cks calculates it automatically or not,if it calculates it automatically you are affixed, or do you must do to part with another program!!
You do not really understand something until you can explain it to your grandmother (Einstein)
do not lay hands on it if not inkiodi!!! buy piasini and dedicated to the ecu..with cock-v48-51-53 I failed ..with piasini go quiet, you can do all the tests that you want a time that you read..!!!!
What is a hare? A rabbit Abarth
the procedure ? this physically: I take mpps I connect it to the obd of the vehicle, connect the usb to the pc and start the program by selecting the vehicle model and the version of the ecu
if I try to read I f? not even press the read button why? appears grey
if I try to write tells me to correct the checksum before starting the procedure, and sends me to take a dll file that I have not...
I tried to calcolarmi the checksum using ecm titanium, taking a gold of a other 5sf3.m1 with sw is different, I know how to calculate the checksum, but not s? how to create the dll that is compatible with the sw of the mpps
to get it to boot I can use the same scheme used for the cock?
from the tour as mpps has taken obd2 interface I have to take the obd and put a wire to kline and send it on to the unit and, of course, share the gnd and 12v??
edit. to make it to the tour... as a power supply can I use a power supply for pc 12v 19A?
Last edited by leandro89; 25-01-2014 to 19:03
without offense, we are here to share opinions and help those who know less, in the limits of the possible, but if one does not understand electricity and tap a wire current, what happens? in your case you started the post asking for information, but the machine in question does not have virtually nothing written, and then slowly we got now are you still mixing 3000 thousand things to me you're making too much of the confusion that you speak of read-modify-write a file to a machine gasoline sucked that no one reads and writes in the traditional way which does not change in a simple way that does not take nearly anything done by a professional, think a beginner as if nothing had happened,also, remember that a hole in a piston on a gasoline-it is very simple and planting the ecu not to say burn it, and even more simple then my best advice is:
why do not you entrust to a professional?
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
if I were to go to a professional, surely I was not here to ask for information and help, especially...
if you do not understand, but I think I was clear in the writing, I have written all the data of the controller, and since here it is st? speaking of professionalism, you should know that the ecu in question is the only fit petrol engines of fiat, including the 1.2 and 1.4 petrol grande punto, stilo, 1.6, and cos? ... the hw300 m1 only fits great point... so it was not difficult to understand, then I'm not mixing 3000 things, since I have currently only one interface at this time and ? the mpps, I just wanted to know if ? can read it via this interface, even on the bench, even putting it in the boot I do not f? worry, just that I give the certainty I do I do not have problems, but at least a guide, not only for me but also for the other at least one base in a way that someone can support...
This ? a beautiful world, but no one on the internet wants to share their knowledge... pistons with holes in them, and other problems that are not there... I did 6 years in the workshop should removing, maybe in 6 years, a little something I made...
Having said this my intention ? to eliminate the holes of this mapping is the ecu, the car ? pretty much dead, has a provision very bad non-linear with a hole on 2000rpm 3500rpm and 4500rpm, when in theory at 4500 rpm is makkina should fly xk has the maximum torque them... and then I decided to read IS the map of this unit, modify it and write it... but since ? the first time I make a 5sf3 and I never put a ecu in the boot, also perk? on the golf fiesta and other cars that I did read, I'd adjust and I wrote and everything was fine... now on this I can not read it, but only scriverlaa, and as I have found online file ori of the same unit but with different software (and in spite of us? the mapping was identical and confirmed the holes that I have found) my curiosity? you ? aquita... so I posted the question, but siccomee has had a negative outcome, I made another: you can? read in boot via mpps? I ? was said to you... but the schema to put it in the boot where can I find it?... for ovviet? both for read and for write it I have to send her to always boot right? mpps asks me the correction of the checksum, I my s? gi? that of cks this unit has D9EA but the program mpps at the time of writing I require the fix, and I f? search for a file checksum.dll <- where, I take it? the calculation on ecm c'?... the f?... but the file as I create it?
I repeat I do not want to rely on a professional, otherwise I wouldn't be here asking for help and information, and then you... you are not a professional?
Write permission
Quote
