what do you advise me can I buy an inexpensive one, or wants us to be professional I have seen that there are also small in the example, type the nails, hands....
what do you advise me can I buy an inexpensive one, or wants us to be professional I have seen that there are also small in the example, type the nails, hands....
I don't know...for me is as good as another
ok the lamp I found it now, can you give directions on how to do it, I did some tests but nothing has a good end...... Maybe I'm wrong in the procedure aspect of your news thanks........Originally Written by magi1984
cio?? what's wrong with a happy ending???
anyway, I told you to use a new eeprom
I am what you suggested to delete it with the UV lamp
personally, I've never done it, the exchange and that's it.
not ? the cost of an eeprom which leaves me gain
you are right I listened to pinotec I honestly thought that you knew the system, however, now look for "weapons"? the new then I write it....
Last edited by sno74; 04-09-2012 at 14:44
I wanted info to erase with uv-let's see if c'? the I also do in the meantime that aspect comes the eprom new
must be under the lamp for at least 20\25 minutes, then check that in reading the eprom is empty
you should build you a box where you can put the lamp , there must be only the uv light
eprom the insert in the box that is obviously discovered the slide
today ? arrived eprom new gi? written and soldered on the ecu, but I have to unplug the transmitter on the key, or I leave everything connected.....
disconnect the antenna
Write permission
Quote