scodifica ecu fenix 5

[djdanny]

Program the TMS374
upload tms.

[cristianbomberos]

He is perfectly right gezame I also scodifico that way and it always works guaranteed

[raffaell0]

Hi someone knows how to explain with the pi? the simplicity? the scodifica through short. And when you ? managed to scodificarla nn you can? disconnect l?power supply, otherwise, you recoding?

[net_proo]

gezame
gezame is offline
THE AVERAGE USER (FO)

Join Date
Mar 2013
Posts
218

Hello
Only necessary to cut the pin code, and after ponticelare the pin 22 0 pin 23 dila eprom plcc-mass (conettare with the screwdriver, this pin 22-23, 21-24) cualque minute.
You hear the relay activate and dessattivare, and you feel like you activate the fuel pump.
You are the light of injection ilumina fixa, the scodifica are made.
For partial, after the process, conettare other times the pin code.
Hello

hi,
it is a proven solution

[raffaell0]

Sorry, I also have a Fenix5 with 55pin qu?.I tried the scodifica as a video ?c ? in the network with the short on the flash by using a pair of tweezers: A1conB1,A2conB2,etc., But nothing.
Someone who has already? done, I could explain how I can do? The previous solution with a screwdriver nn l?I understood,apologizing l?ignorance. The one on the video, is it wrong perhaps a step, but even I managed to do it.A light bulb lights fixed, and l?the other turns on only when i join my pin A2conB2 using tweezers. But it does not turn on espegni. ? a 1.6, then the pinout ? as in the diagrams.

[net_proo]

hello,
for TMS374 pu? use TMS374 decoder ? better for fenix 5

[Alessio93]

Sorry guys but the pin 21 22 23 and 24 I have to be bridged with the mass ?

[scinti]

Someone uses the lamp light and situated the corresponding pin to ground, I use a dedicated

[Marting]

The ECU should Immo off There are three ways