also this solution ? seguibile (or spinet spill in the detachment and reattachment)Originally Written by blackwolf76
also this solution ? seguibile (or spinet spill in the detachment and reattachment)
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Renewal thanks for the concern boys! The filter holder ? the all plastic! Beginning to believe I that the sensor is defective, unfortunately! Excellent the idea of the test with the first doblo I ricapita! ;-)
Hi. If you still have the old ones that no tidava this problem reconnect it electrically, if disappears the error ? the new that is not v
IF you broke the lower part you can try to recover aolo the top from the old and see a bit of that happens.
[QUOTE=blackwolf76;55613]IF you have broken the lower part you can try to recover aolo the top from the old and see a bit of that happens.[/QUOTE
my problem ? the sensor below unfortunately!
follow the advice that you have given chase a port filter used, or if you have a new workshop repair smontalo, and test you take out the doubt definitely.........
Hello some time ago I too had the same problem and after days to impazzirmi to do the various tests, and decommissioning of an entire car, including electric wiring, I arrived at fault, it was the body computer.......
Hello, but the sensor ? still the old one or ? a piece embedded in the filter??
however, as mentioned already by another user connects the old filter to the spinet and the tubes leave them connected to the new that you have mounted and if you turn off are you sure the problem to support filter again otherwise if I remember correctly also point 188, ypsilon 101 and someone else have the same filter
Thank you all for the responses, guys the sensor ? a all of a piece with the filter holder, unfortunately! As soon as I have time, I plug the old sensor evediamo that happens,if I solve it to him I leave it connected! So much...!!; ;D
Write permission
Quote