Big problem edc15c2

[gezame]

But what fuel pump are we talking about a 1.6 hdi ? did not pump low pressure! guys don't take whistles for flasks

Hello
You saw cualque peugeot 1.6 HDi with the ecu edc15c2..............
I think the wrong one so much.

[cele]

I'm sorry but that pump would hear when you turn on the picture??

[carlo abarth]

begins post the file that is read with the cock, and put more data on this ecu hw and sw!!!

[penelope888]

here is the data of the ecu
Bosch
Diesel
edc15c2 (3 plug) version 2
0281011081
1037364193

this ? the read file with the rooster

[msport (exil77grande)]

here is the data of the ecu
Bosch
Diesel
edc15c2 (3 plug) version 2
0281011081
1037364193
this ? the read file with the rooster

last warning then you banno,passes in the section presentations and foul as it should.

[matech]

what size is the file that you have? (the one your bed from the rooster, original)

it should be the complete file if I'm not mistaken. In this case, you must rewrite it with a programmer, or in the boot.

I know that you forgot to check...am I wrong?

[rego88]

the same problem ? happened to me..... I banged my head for three days.....
then.... leave the e2prom original, take the file that you read with galletto ? complete, ributtalo in the 29f400bb with a programmer to flash, then take the diagnosis of peugeot and make the alignment of the key, it asks for the card of the pincode.....
evvai in place.....

[sebastiano345]

maybe without unsolder the rewrite with check, correct and then do the key ,you have made a diagnosis?

[gcmotor]

Hello guys I time ago I had the same problem on a spear lbs 1.9 jtd. It has been on the block during the writing. I had to unsolder the flash and rewrite it with an external programmer. In that case I had the original file, not corrupted, and I could solve it.
I think that the process of rego8 is cotrretta. Try it

[penelope888]

happy end ,
finally ? got the programmer and I was able to reprogram the am29f400bt
the car ? allocated to the first turn of the key without any problem
I thank all those who gave me the advice to resolve the problem
thanks again