Scodificare Ecu

[gizmo]

Ok, thanks a lot just potro it take? one from a scrap car, and the lighthouse of my trials

[giary74]

Ok, thanks a lot just potro it take? one from a scrap car, and the lighthouse of my trials

Quoto in full.
I have done just as well, to make experiments on the ypsilon 70cv.
I read the original with the galletto 1080 and then I rewrote everything with the BDM100 in the one taken in the demolition.
Result: the control unit perfectly cloned, and no light on.

[zaga1]

Ok, thanks a lot just potro it take? one from a scrap car, and the lighthouse of my trials

Yes, but remember that for every unit ec to the method go adagio without haste, I recommend to you ;-)

[gizmo]

Take or a ecu to do in the boot and one in the bdm

[claudio-abarth]

I have a bosh ME7.9.10 , for scodificarla should I desolder the eeprom 95080,edit the file read by the program,and then rissaldare the eeprom, or am I wrong?and then at the first turn of the key the ecu and capture the new engine code?

[msport (exil77grande)]

exactly as it says munro if you total not capture any code at the first start-up that applies to the scodifica partial.

[claudio-abarth]

in fact, from what I've read around the ME7.9.10 not ? can make a scodifica total,can you? do only partial

[ugoboss]

in fact, from what I've read around the ME7.9.10 not ? can make a scodifica total,can you? do only partial

this is the you can return the virgin as a new ecu, but not the total.

[munro]

if you do the scodifica total does not acquire any queues at the ignition on....

[carbo92]

I would add that for some ECU you just need the cock v2! Not ? absolutely true that said to the first post, i.e. that with the rooster read and write only