information on mpps v12

[msport (exil77grande)]

are not all the same, I have also heard to say that some version of these ecu programmed before may of the year following that you can rewrite,
I repeat only heard you say I can't confirm.alternatively e-mail the data of the ecu sw and hdw year etc.
es: last week galletto 2 on the fiat croma 1.9 read ok, write, nothing, tried again with mpps all ok reading ? writing. that's why? I am of the opinion that in a repair shop that works on the ecu, we always want to almost everything. from bdm at mpps from the soldering station to the programmer. etc etc

sensa offense, but if you have a programmer-the-counter and a programmer to the obd both officers will not need anything else your speech could go if you are working with the clones.

[alex68]

sensa offense, but if you have a programmer-the-counter and a programmer to the obd both officers will not need anything else your speech could go if you are working with the clones.

yes msport.? anyway, even if you have a mpps official es: you would read a sirius 32 while gallo clone the is x to avoid removing the 29f200 and read it to the programmer.

[domy_pikkio]

are not all the same, I have also heard to say that some version of these ecu programmed before may of the year following that you can rewrite,
I repeat only heard you say I can't confirm.alternatively e-mail the data of the ecu sw and hdw year etc.
es: last week galletto 2 on the fiat croma 1.9 read ok, write, nothing, tried again with mpps all ok reading ? writing. that's why? I am of the opinion that in a repair shop that works on the ecu, we always want to almost everything. from bdm at mpps from the soldering station to the programmer. etc etc

good evening to all quiu will place the data in the ecu sw:0281012549,hdw:1037a50359 type engine z19dt.....thanks to all of x your resp appearance of new info thank you and welcome you domy

[domy_pikkio]

the boys then cm do I write it????tips????? my client wants the job done....

[alex68]

the boys then cm do I write it????tips????? my client wants the job done....

I will not recommend to force since? the risks of nailing the ecu and then I know' cabbage, I repeat mpps ? a very good programmer, but therefore also as says the friend MSPORT, when you are working with clones you have to have almost everything. you have the bdm? in case the resume if something goes wrong. the rest don't you try it with the various protocols that are writing to the edc16c9/39 and good luck.

[domy_pikkio]

I will not recommend to force since? the risks of nailing the ecu and then I know' cabbage, I repeat mpps ? a very good programmer, but therefore also as says the friend MSPORT, when you are working with clones you have to have almost everything. you have the bdm? in case the resume if something goes wrong. the rest don't you try it with the various protocols that are writing to the edc16c9/39 and good luck.

but the thing which I wonder and why? the colleague with the same version was written ?but the fault ch makes me' he ch when I go to sciverla nn part x of nothing

[ioni]

but the thing which I wonder and why? the colleague with the same version was written ?but the fault ch makes me' he ch when I go to sciverla nn part x of nothing

It seems to me that you have answered:
- pu? to change the programmer,almost certainly speaking of clones, and, as you know, often not all are the same
- pu? change the ECU, above a colleague cited models is not writable.
I can tell you that if mpps LAW usually WRITE (or, rather, to the absurd difficulties? more are read often), but if your case does not go ...do not go !