you must pay close attention to these bdm clones many have put the units out of use,would scruple xch? not check with tester if ? actually to the contrary.
you must pay close attention to these bdm clones many have put the units out of use,would scruple xch? not check with tester if ? actually to the contrary.
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
done and ? the result, the grip on the contrary, the flat where c'? the red wire went to the left of the bdm and on the ecu to the right that I gather that was the opposite of that? pin 1 corresponds to pin 9
Please try again with the external power supply
micro burned go to the safe place it on the machine and you will see the fan on the ball......
gi? tested with a power supply from the comb, but nothing happens
Looking for a ecu from a autodemolitore and the scodifichi,quiet are the things that can happen either through inexperience or vice versa for too much security
Unshared knowledge remains an end in itself.
resigned you strinato the micro ? as it says in the admin can? happen to inexperience or too much security.....
I think that feeding the ecu from the comb it is almost impossible to burnt myself on a marelli I tried to put on the contrary, the e xxx and not you ? burnt
but maybe I understood right he powered up the ecu by e xxx ? this is what has made burn the micro........
It is, in fact, I can't remember a thing, on manual, c'? written how to connect bosch to an external power supply?
Write permission
Quote