Op-Com For the GM Group

[klajdin]

I also have this interface, and I have to say that I've never used it until now because when I ? served the I had left to csa for? I saw that in the list there are no cars after 2010, do you know if c? some new Sw and Fw update ?

[che_guevara731]

c'? the translated version,can you? upload a video in this forum?

[Pama]

I have been using for a long time, The op-Com
(a species of Tech2 usb)
This interface supports a variety of color? control:



Supports the drive OPEL from 1992 to 2012



Allows you to program the new keys on?immobilizer ( you need the CAR-PASS)

..........................................
[/url]

I would like to program a new key on?immobilizer of my OPEL CORSA year 1996, I have the car pass, but some vendetori of the OP COM, they informed me that not all of the chinese clones may be able to do it.

Around the world you have already? run this operation, and with which device?
Thank you

[rebirthafterrevenge]

Do this without any problems ! I have made a lot of corsa 1.2 petrol and also astra and zafira! with the carpass do it all.. you'll see that it works

[Pama]

Do this without any problems ! I have made a lot of corsa 1.2 petrol and also astra and zafira! with the carpass do it all.. you'll see that it works

Reading network recommend the recent model v. 5 with PIC18F458, can you tell me if it would be fit for my car of 1996?

There is a guide on the procedure of programming, immobilizer key?

[Pama]

--------------------------------
are the owner of a ople tigra 1996,I bought the op-com ...................................

surely we have the same ecu....,I would like to duplicate a key engine immobiliser,could you tell me if your op-com has the mode? to do it?
which model ??

thanks

[alien78]

? an interface that works with its dedicated software!

? an interface with dedicated software, the clone costs about 20?......

[alex68]

the other versions do not have the Italian language.

[alex210392]

Hi I have a problem with OPCOM, I would like to activate it on a corsa C the clock in the display kilometers and through guides on youtube specifies that you need to edit in the hex file inside the eprom framework tools by downloading them with opcom, since here all ok, but as soon as I give the command read to me crashes the program, tried it on different laptops and the result is the same, someone that is successful or at least that was in my same situation and has solved it?