Information for all to read and write EDC15C7 FIAT group, you have to unsolder the eeprom.
It can? be done with or Galletto Kess V54
Information for all to read and write EDC15C7 FIAT group, you have to unsolder the eeprom.
It can? be done with or Galletto Kess V54
can I know where did you purchase kessv2?Originally Written by ecuprom
If ? correct, hes using the clone
but it is small change in the hardware, you may know or not?
Will try? to make a description of how it works perfectly for us $ 0.30. I upload photos with the change. It's very simple.
You can? say, the problem of KESS v2 with the K-line ? the voltage.
If you select the line voltage source k ? approximately 4.5 v should be the voltage of the battery.
ok are waiting for the photos then.
ugo ---- president A.E.P.
ugoboss expect
Dear Ecuprom!
I would like to ask you to send me a photo of the PM, I also know that over the kessv2 was established, I have a problem with the K-line operation. 1N4148 diode is, but I do not know where to solder. If I understand correctly, you can join this transformation 24V systems without damage if there is a fw modules which are active in the trucks.
THX!
Best Regards!
Here, the editing, the photos ? the original, but ? equal to kess clone.
Above all, don't try to put another diode 1N4148, place in a certain sense as the photo.
Quote
