KESS V2 MY працуе на 100%

[ake85]

тады памыляецеся мадэль аўтамабіля! senn? паўтараю ? кідалі! жарт, аднак, я чуў, што многія з іх гэта праблема і яны адаслалі назад у дапамогу

[MarcoDJ]

Мая таксама на kline часам я d? памылка "будзільнік" / будзільнік!!!!
я хачу паспрабаваць паставіць дыед, і мы спадзяемся, ідзеце лепш!!!

[michele30]

Raga, але мой не піша iaw59f кажа мне, каб змяніць хуткасць запісу , але і ў setup не дае мне магчымасць змяніць хуткасць, але толькі pull-p, што не ведаю, што гэта такое.
У вас есць інфармацыя ?

[fabiovts88]

вы ніколі не пісалі ecu альфа міф tjet або 500 abarth bosch me 7.9.10 з kess v2 клон, серыйны?

[ugoboss]

вядома, гэта добра, няма праблем.

[fabiovts88]

Дзякуй, уга, каб l info

[vr6-killer]

Паважаныя Ecuprom!
I would like to ask you to send me a photo of the PM, I know that also over the kessv2 was established, I have a problem with the K-line operation. 1N4148 дыед is, but I do not know where to solder. If I understand correctly, you can join this transformation 24V systems without damage if there is a fw modules which are active in the trucks.

ДЗЯКУЙ!
Best Regards!

[vicius_the_one]

Forget about дыед рашэнне. it is a hammer mod рашэнне. don't you realize alientech designed a very good пхд? does it really needs a worthless дыед to help it work? no, of course not!! this is п'янлівы info people! unuseful!!!
problem is not the absence of tht дыед!!! the problem are other parts. i have just fixed myself my clone with parts of 0.7$.
I also tried this Дыед mode and it was worse with it.
Стоп п'янлівы сябе reading above. it a lie.

[ugoboss]

Forget about дыед рашэнне. it is a hammer mod рашэнне. don't you realize alientech designed a very good пхд? does it really needs a worthless дыед to help it work? no, of course not!! this is п'янлівы info people! unuseful!!!
problem is not the absence of tht дыед!!! the problem are other parts. i have just fixed myself my clone with parts of 0.7$.
I also tried this Дыед mode and it was worse with it.
Стоп п'янлівы сябе reading above. it a lie.

I tried it and it works great with the diode, but if you have another solution why not do you say, so let's try.

[vicius_the_one]

I didn't say it not working. I said it is a hammer mod solution that was not figured out by designers of pcb. It is just a way to force вкп work but not as it has to be. Problem are in the group of those eleven sot23 транзістараў. When I put дыед it worked even worse. After change transistors everything works fine. I need a close detailed picture of area with those 11 транзістараў so I can read their маска