ECU 8f2.G1 G point 75HP - I'm looking for high resolution photos of the solder side comb

[emilground]

Hello guys, como from the title I am looking for a high-resolution photo since? I have to rebuild the tracks on the ecu 8f2, and to do that I need a picture where they are visible to the slopes from the side of the welds of the comb. The ecu, as far as I ? been said it ? burned since? ? went to short-circuit the control unit of the glow plugs that is located under the battery ( it seems, according to the electricians, the acid has corroded the ecu then ? way to short and you ? charred by burning the ecu the engine). As the car ? a dear friend of mine I would like to try to repair the tracks burned and see if it starts.. in the meantime, they are looking for another. If someone can? make a photo where you can see the slopes of the comb pi? great could make them have ? thanks

[emilground]

Thanks a lot, very nice
I have rebuilt the tracks, I only miss a photo where you to understand on which pin of the comb should be of contacts. the connector that I am interested in ? the pi? great.

[emilground]

Hello, thank you for having made and sent !
I noticed for? that ? slightly different from my own, in fact to me only has 3 runs small just above the contacts of the large comb, while in your has 4. yet to look at the arrangement of the components ? everything in the same place!
I doubt that will change physically the second tab of the number. anyway to look good (if they were the same, the contacts) I should have respected the slopes, and then in the late morning, porter? the ECU where is the machine to see if the part.
Thanks again for the availability? !, friendly

[emilground]

unfortunately, nothing to do, the car is not starting, I tried