I did not know, neither do I now I think I understand thanks
I did not know, neither do I now I think I understand thanks
for? c'? also to say..... if you are welding cold after having restored most of these ecu's come back! why jump the other components that go to affatticarsi when the ecu works with the solder!
I take it off the board and gratto slightly with a bit of abrasive paper, pitches on the other side of the card, then risaldo all for good.
It is a work-a little bit longer, but in doing so i shall never go back...
I change the capacitors and the transistors and risaldo all....so far everything is ok...
max can you post some pictures of the capacitors and transistors that have changed, including the abbreviations?I would like to comprarle. thanksOriginally Written by maxsek
You do not really understand something until you can explain it to your grandmother (Einstein)
very rarely,but to me ? sucesso a couple of cases that jumps to a final power in other cases, skip one pin of the capacitor is large(the one immersed in the silicone)cases are very rare,95% of the welds resolves
also the mosfet and the voltage regulator damage problems
hi, I can not download the file
Read the rules purchase............
in addition to the welds should also see the capacitors if they are swollen, functioning etc.
Write permission
Quote